JLG 3394RT Service Maintenance Manual page 48

SECTION 3 - CHASSIS & SCISSOR ARMS
7. Remove Snap Rings (13).
8. Pull Plane Gears (1).
9. Drill 2 holes into Shaft Nut (4) at 180° spacing
according to Drilling Hole Sketch (step 10).
NOTICE
DO NOT DAMAGE THE BEARING CAGE OF TAPERED ROLLER
BEARING. CAREFULLY REMOVE METAL CHIPS.
3-12
10. Drilling Hole Sketch
11. Split the Shaft Nut (4) in the area of the two drill
holes by means of a chisel, and remove from Spin-
dle (34).
DO NOT DAMAGE THE BEARING CAGE OF THE BEARING (11).
DO NOT TURN THE SHAFT NUT; POSSIBILITY OF SPINDLE
THREAD DAMAGE.
– JLG Sizzor –
NOTICE
3121133