JLG 3394RT Service Maintenance Manual page 60

SECTION 3 - CHASSIS & SCISSOR ARMS
28. Press bearing on drive shaft.
29. Install shaft in supporting axle (1). Put in simulation
ring (2). Mount bearing with port plate , fix with 2
screws (3)
3-24
30. Place measuring device. Ascertain tolerance. Grip
3
2
1
– JLG Sizzor –
shaft with Seeger ring pincers and move up and
down. [Simulation ring 1mm + tolerance + (bearing
pretension 0.05 - 0.08) is resulting in thickness of the
synchronizing disc]. Grind synchronizing disc to
dimension.
3121133