Notes On Possible Property Damage - Samson 43-3 Mounting And Operating Instructions

Safety instructions and measures
WARNING
!
Risk of personal injury due to residual process medium in the regulator.
While working on the regulator, residual process medium can escape and, depending
on its properties, may lead to personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from all the plant sections affected and the
regulator.
Î Wear protective clothing, safety gloves and eye protection.

1.3 Notes on possible property damage

NOTICE
!
Risk of regulator damage due to incorrectly attached slings.
Î Do not attach load-bearing slings to the regulator.
Risk of regulator damage due to unsuitable medium properties.
The regulator is designed for a process medium with defined properties.
Î Only use the process medium specified for sizing the equipment.
Risk of regulator damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines in the plant.
Î Flush the pipelines before start-up.
Risk of regulator damage due to the use of unsuitable lubricants.
The lubricants to be used depend on the regulator material. Unsuitable lubricants may
corrode and damage surfaces.
Î Only use lubricants approved by SAMSON.
When in doubt, consult SAMSON.
1-6 EB 2173 EN