Notes On Possible Property Damage - Samson 3275A Mounting And Operating Instructions

WARNING
!
Exposure to hazardous substances poses a serious risk to health.
Certain lubricants and cleaning agents are classified as hazardous substances. These
substances have a special label and a material safety data sheet (MSDS) issued by the
manufacturer.
Î Make sure that an MSDS is available for any hazardous substance used. If neces-
sary, contact the manufacturer to obtain an MSDS.
Î Inform yourself about the hazardous substances and their correct handling.
Risk of personal injury through incorrect operation, use or installation as a result of
information on the actuator being illegible.
Over time, markings, labels and nameplates on the actuator may become covered with
dirt or become illegible in some other way. As a result, hazards may go unnoticed and
the necessary instructions not followed. There is a risk of personal injury.
Î Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î Immediately renew damaged, missing or incorrect nameplates or labels.

1.3 Notes on possible property damage

NOTICE
!
Risk of actuator damage due to excessively high or low tightening torques.
Observe the specified torques when tightening actuator components. Excessive tighten-
ing torques lead to parts wearing out more quickly. Parts that are not tightened far
enough may loosen.
Î Observe the specified tightening torques (u AB 0100).
Risk of actuator damage due to the use of unsuitable tools.
Certain tools are required to work on the actuator.
Î Only use tools approved by SAMSON (u AB 0100).
EB 8314-1 EN
Safety instructions and measures
1-5