Notes On Possible Property Damage - Samson 43-8 Mounting And Operating Instructions

Safety instructions and measures

1.3 Notes on possible property damage

NOTICE
!
Risk of irreparable regulator damage caused by the regulator components being
taken apart.
The thermostat, set point adjuster and capillary tube form an inseparable hydraulic
unit. If these components are dismantled (e.g. removal of the capillary tube), the regu-
lator will be irreparably damaged and will no longer be able to fulfill its monitoring
and control task.
Î Do not dismantle the regulator.
Î Only perform allowed activities on the regulator.
Î Contact SAMSON's After-sales Service before replacing spare parts.
Risk of valve damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines in the plant.
Î Flush the pipelines before start-up.
Î Observe the maximum permissible pressure for valve and plant.
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î Only use the process medium specified for sizing the equipment.
Risk of leakage and valve damage due to excessively high or low tightening
torques.
Observe the specified torques when tightening valve components.
Excessive tightening torques lead to parts wearing out more quickly. Parts that are too
loose may cause leakage.
Î Observe the specified tightening torques.
8 EB 2178 EN