10.4.1
LENS BLOCKING
Select Lens Blocking in the Alarm menu to open the following page:
Select Enable to activate the Sensitivity and Send E-Mail options.
•
Sensitivity: Set the sensitivity level (level 1~6; the higher the value, the greater the sensitivity level).
•
Send E-mail: When enabled, it can be used with SMTP to enable the sending of e-mail.
•
Mail Linkage: This is disabled by default. When enabled, it can be used with SMTP to enable the e-mail address.
IMPORTANT NOTE:
➢
The sending push notifications is unavailable for Lens Blocking event using IP Camera stand-alone. In order to
send push notifications with this event please connect IP Camera to NVR/HVR.
DS1099-047A
28