urmet domus PRO Series User Manual page 7

Network configuration
➢
The camera default setting is DHCP mode. If the installation network does not support dynamic
addressing (DHCP), the device will automatically switch to the factory-set IP address 192.168.1.168. The
Urmet "Device Search Tool" software can be used to change the IP address and other network settings to
prevent conflict with other devices on the network.
➢
Once the camera is properly connected and configured on the IP network, its video and settings can be
viewed from a PC or smartphone.
Network connections
➢
When connecting a remote PC (using client software or a browser), it should be borne in mind that any
video channel used on the PC will have a "unicast" connection (TCP, RTP, UDP).
The device can support up to 10 "unicast" connections, thus the video stream can be viewed from a
➢
maximum of 10 remote devices (PC or smartphone) at the same time, depending on the available
bandwidth.
DS1099-047A 7