Ftp - urmet domus PRO Series User Manual

•
RTSPEnable: Enables or excludes RTSP. RTSP is enabled by default. If disabled, it cannot be found with
ONVIF.
•
RTSP Port: The default port number is 554 and it can be changed by setting another value between 1024 and
65535. Changing this parameter will restart the system.
Operating instructions:
rtsp://IP:Port/ch01/A A:0(Main Stream), 1(Sub Stream)
10.3.7

FTP

FTP: the FTP service setting is used with the alarm function to send images to the FTP server.
Select FTP in the Network menu to open the following page:
•
FTP Enable: Enables or excludes the FTP function.
•
Server: Enters the address of the FTP server.
•
Port: FTP service port number; the default number is 21.
•
Username: The username for access to the FTP service.
•
Password: The password for access to the FTP service.
•
Transfer images: Select to allow the sending of images.
DS1099-047A 25