Warnings - urmet domus PRO Series User Manual

2.3

WARNINGS

Power supply
➢
Before connecting the equipment to the electrical outlet, ensure that the nameplate specifications match
those of the mains power supply.
➢
It is advisable to install a suitable disconnection and protection switch upstream from the equipment.
➢
In the event of failure or malfunction, disconnect the power supply at the main switch.
➢
Use only the power supply unit provided with the product.
Safety precautions
➢
Keep the device away from rain and dampness to prevent the risk of fire and electrocution. Do not introduce
any material (solid or liquid) inside it. If this should accidentally occur, disconnect the device from the mains
and have it inspected by qualified personnel.
➢
Never open the device. In all cases, contact qualified personnel or an authorised service centre for repairs.
➢
Keep the device away from children, to prevent accidental damage.
➢
Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
➢
Do not use the device if it falls or if the external casing is damaged. Continued use of the device in such
conditions could cause an electric shock. In such cases, contact the retailer or authorised installer.
Installation precautions
➢
Do not install the camera in places exposed to rain or humidity. In these situations, use the special cases.
➢
Avoid pointing the camera directly towards sunlight or other intense sources of light, even when switched
off; the subject to be filmed should not be against the light.
➢
Avoid pointing the camera towards reflecting objects.
➢
The presence of certain types of light (e.g. coloured fluorescent light) can distort the colours.
➢
Do not position this device on an unstable surface, such as a tottering or slanted table. The device could
fall, causing injury or mechanical failures.
➢
Stop using the device if water or some other material penetrates inside it, to prevent risk of fire or
electrocution. In such cases, contact the retailer or authorised installer.
➢
Do not cover the device with a cloth while it is running to prevent deformation of the external casing and
overheating of internal parts, causing risk of fire, electrocution and mechanical failure.
➢
Keep magnets and magnetised objects away from the device to prevent faults.
➢
Do not use the device in the presence of smoke, vapour, humidity, dust or intense vibrations.
➢
Do not operate the device immediately after moving it from a cold place to a warm place and vice versa.
Wait on average for three hours: this will allow it to adapt to the new environment (temperature, humidity,
etc. ).
Precautions for use
➢
Check that the device is not damaged after removing it from the packaging.
➢
Ensure that the working environment is not too humid and that the temperature is within the indicated range.
➢
Avoid pointing the camera towards sunlight to prevent damage to the sensor.
Cleaning the device
➢
Rub gently with a dry cloth to remove dust and dirt.
➢
Dip the cloth in neutral detergent if dirt cannot be removed with a dry cloth alone.
➢
Do not use spray products to clean the device. Do not clean the device using volatile liquids (such a petrol,
alcohol, solvents, etc.) or chemically treated cloths to prevent deformation, deterioration or scratches to the
paint finish.
➢
Disconnect the device from the electrical outlet before any cleaning or maintenance operations.
Recording images
➢
This device is not designed as a burglar system but mainly to transmit and record video images. Urmet
S.p.A. cannot be held liable for loss or damage due to theft from the user's premises.
➢
Make a test recording before using the device to ensure that is working correctly. Please note that Urmet
S.p.A. is not liable for any loss of stored data or damage caused by incorrect installation, improper use or
malfunctioning of the device.
➢
This device contains precision electronic components. Protect the device from bumps and jolts to ensure
proper recording of images.
Privacy and Copyright
➢
The IP camera is designed for CCTV systems. The recording of images is subject to the laws in force in
the country of use. Recording of images protected by copyright is forbidden.
➢
Product users are responsible for checking and complying with all local rules and regulations regarding
monitoring and the recording of video signals. The manufacturer SHALL NOT BE LIABLE for any use of
this product that is not in compliance with the laws currently in force.
http://www.garanteprivacy.it
Firmware upgrade
➢
You are advised to refer periodically to URMET S.p.A. Customer Service Technical Assistance to check
the availability of firmware updates.
DS1099-047A
.
6
For more information see