Table of Contents
Advertisement
DS1099-047A
Opzione
Value
Zoom
Step/-/+
Focus
Step/-/+
SEMI
AF MODE
MANUAL
ONE SHOT AF
TDN AF
ON
LENS INIT
SAVE POSI
POWER MODE
AutoFocus
Restore
Refresh
14
Manually adjusts zoom (+ zoom in / - zoom out)
Step: defines zooming speed
Manually adjusts focus (+ increase / - decrease)
Step: defines focusing speed
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
AUTO
operations are finished.
OFF
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required.
/
Function not available.
This function, when activate, allows automatic focus
OFF
adjustment at each day->night or night->day switch.
This re-initialises the optics and obtained optical
calibration. To be performed when the camera is installed
/
for the first time and in case of movements with
consequent change of the framed picture.
IMPORTANT: do not use with AF MODE equal to OFF.
This is used to adjust the zoom whenever the camera is
switched back on.
OFF
SAVE POSI: this holds the zoom position set before the
camera was switched off.
WIDE
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
/
Adjusts focus automatically
/
Resets PTZ interface default settings (including focus)
Updates the PTZ interface with changes to parameters
/
(including focus)
Explanation
Advertisement
Table of Contents
