10.4.3
LENS BLOCKING
Select Lens Blocking in the Alarm menu to open the following page:
Select Enable to activate the Sensitivity and Send E-Mail options.
Sensitivity: Set the sensitivity level (level 1~6; the higher the value, the greater the sensitivity level).
When enabled, it can be used with SMTP to enable the sending of e-mail.
Send E-mail:
Mail Linkage: This is disabled by default. When enabled, it can be used with SMTP to enable the e-mail address.
10.5 DEVICE
This includes SD Card, Logs and Audio. The respective interfaces and functions are described below.
10.5.1
HDD (WHERE INCLUDED)
Select HDD in the Device menu to access the following page:
Insert the SD card in the device: the system will automatically detect the total capacity and provide information on the
remaining recording time.
Overwrite: when the SD card capacity is full, new recordings overwrite the previous ones (this function is enabled by
default).
Format: Formats the SD card.
DS1099-024B
29