Video Streaming - urmet domus PRO Series User Manual

•
Type: Network connection mode: DHCP (Automatically Acquired), Static (Manually configured) and PPPOE;
DHCP (Automatically Acquired) is the default setting.
•
Client Port: The port for the clients that connect to the IP camera.
•
HTTP Port (Porta http): Web port for the IP camera.
•
IP address: The IP address of the IP camera.
•
Subnet mast: The subnet mast of the IP camera.
•
Gateway (Gateway): The default gateway of the device.
•
DNS 1 (DNS 1): Sets the primary DNS server.
•
DNS 2: Sets the secondary DNS server.
•
UPNP: Enables or disables the UPNP function for the device (enabled by default).
Note: To enable the UPNP function, the client port must be set to a value between 1024 and 65535; the client port is
used to connect with a mobile phone or other device.
10.3.2

VIDEO STREAMING

Select the Video Streaming Setting in the Network menu to open the following page:
•
The following bit streams are available by default: Main stream, Sub stream and Mobile stream. The
resolution, frame rate, video code, encryption level, bitrate control, bitrate modality, bitrate frequency, audio and
frame interval can be set for the main stream, the substream.
•
Resolution: Sets the resolutions for the respective bit streams: The maximum resolution for the main stream is
2592x1944. The maximum resolution for the substream is 1920x1080.
•
FPS: When the refresh rate is 50Hz, the maximum available FPS is 25 fps. When the refresh rate is 60Hz, the
maximum available FPS is 30 fps.
•
Video Code Type: Sets the video encoding (H265/H264) for each bit stream.
•
Video Code Level:
•
Bitrate control: Sets the constant or variable bitrate for the stream.
•
Mode: User-defined or Predefined.
Note:
➢
The range of the main bit stream is 256-8192.
➢
The range of the substream is 128-4096.
DS1099-047A 21