Push The Crown Back Into Position; Setting The Date; Pull Out The Crown To Position - SHINOLA DETROIT Manual

AUTOMATIC MODEL SW510 BH A
If your timepiece features a screw-down crown, you must first unscrew the crown
before you adjust any settings. Refer to page 5 for crown functionality.
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions, please ensure that:
• The crown is in normal, locked position (position 0).
• The two chronograph hands are at zero position.
Second Counter
Hour hand
Second Hand
Minute hand
30 Minute Counter
Date
36
WINDING WHILE STOPPED
Turn the crown counterclockwise until it releases
into position I.
Turn the crown clockwise 30-35 times to restore
the full power reserve.
Reseal the crown by pressing it against the case
and turning it slightly clockwise until it locks back
in position zero.
SETTING THE DATE (QUICK MODE)
Unscrew the crown to release it into first position.

Pull out the crown to position

II (watch still running).
Turn the crown counterclockwise until the
required date appears.
Push the crown back into position I.
If setting the date between 9:00 p.m. and 3:00 a.m.,
follow steps 1 through 3, but be sure to set the date
to the following day.
Remember to reseal the crown. To do so, press it against the
case until the threads engage. Then turn it clockwise until tight.
30x - 35x
1 2
I II
3
37