Turn The Crown Until You Reach The Correct Time; Push The Crown Back Into Position I; Setting The Date; Pull Out The Crown To Position - SHINOLA 5021.D Operation Manual & Warranty Book

CHRONOGRAPH MODEL 5021.D
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the two chronograph hands are
precisely at zero position following
activation of push-button B. If the hands
are not precisely at zero, their positions
must be adjusted. (See the chapter
Adjusting the Chronograph Hands to Zero .)
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
Turn the crown until you reach the
2
correct time.

Push the crown back to position I.

3

SETTING THE DATE

Pull out the crown to position II.
1
(The watch continues to run.)
2 Turn the crown until the correct date appears.
Push the crown back to position I.
3
If setting the date between 9:30 p.m. and 12:00 a.m.,
4
follow steps 1 through 3, but be sure to set the date to
the following day.
I
10
Center stop-second
Minute hand
Hour hand
Minute counter
Date
Second hand
A
I
B
1
I II III
2
3
1
I II
2
3