Related Manuals for SHINOLA bicycle
Summary of Contents for SHINOLA bicycle
- Page 1 Bicycle Owner’s Manual This manual meeTs en sTandards 14764 © 2012 SHINOLA Detroit LLC. All rights reserved.
-
Page 2: Intended Use
This manual contains important safety, performance and service information. Read it before you take the first ride on your new bicycle, and keep it for reference. Additional safety, performance and service information for specific components, or for accessories such as helmets or lights that you purchase, may also be available from their respective manufacturers. -
Page 3: Bicycle Fit
A. BIcycLE FIT 1. Is your bicycle the right size? To check, see Section 3.A. If your bicycle is too large or General warninG too small for you, you may lose control and fall. If your new bicycle is not the right size, ask about exchanging it before you ride it. -
Page 4: First Ride
If you have any questions, or if you feel anything about the bicycle is not as it should WarNiNg: bicycle Wheel rims are sUbjecT To Wear. -
Page 5: Riding Safety
15. Never ride your bicycle while under the influence of alcohol or drugs. • Bright, visible clothing that is not so loose that it can be tangled in the bicycle or snagged by objects at the side of the road or trail. -
Page 6: Wet Weather Riding
WarNiNg: alThoUgh maNy caTalogs, adverTisemeNTs aNd arTicles aboUT bicycliNg dePicT riders eNgaged Bicycle reflectors are designed to pick up and reflect car lights and street lights in a way iN exTreme ridiNg, This acTiviTy is exTremely that may help you to be seen and recognized as a moving bicyclist. -
Page 7: Standover Height
Standover height is the basic element of bicycle fit. It is the distance from the ground to the top of the bicycle’s frame at that point where your crotch is when straddling the bicycle. To check for correct standover height, straddle the bicycle while wearing the kind of shoes in which you’ll be riding, and bounce vigorously... -
Page 8: Control Position Adjustments
The saddle can be adjusted forward or back to help you get the optimal position on the bicycle. If you make any front and back adjustment, make sure that the clamp mechanism is clamping on the straight part of the saddle rails and is not touching the curved part of the rails, and that you are using the recommended torque on the clamping fastener(s) (Section 5.C). - Page 9 The haNdlebars, Which may resUlT iN serioUs iNjUry bicycle, to transfer weight back on to the rear wheel; and at the same time, you need to or deaTh. bicycle brakes are exTremely PoWerfUl.
-
Page 10: Shifting Gears
The best and safest way to inflate a bicycle tire to the correct pressure is with a bicycle with toeclips. The bicycle shop which sells you the toeclips can explain how toeclips and pump which has a built-in pressure gauge. - Page 11 Schraeder valve, depress the pin in the end of the valve stem with the end of a key or other appropriate object. The Presta valve has a narrower diameter and is only found on bicycle tires. To inflate a Presta valve tube using a Presta headed bicycle pump, remove the valve cap; unscrew (counterclockwise) the valve stem lock nut;...
-
Page 12: Service Intervals
Safety Check (Section 1.C) will help you identify some things that need readjustment. To The TreaTmeNT To Which yoU sUbmiT The bicycle. But even if everything seems fine to you, it’s best to take your bicycle to a qualified bicy- The bicycle’s WarraNTy is NoT meaNT To sUggesT ThaT cle mechanic for a checkup. -
Page 13: If Your Bicycle Sustains An Impact
SHINOLA does not guarantee that the same model of product will be available After any crash, take your bicycle to a qualified bicycle mechanic for a thorough check. for replacement. Warranty claims must be made within thirty (30) days following discovery Carbon composite components, including frames, wheels, handlebars, stems, cranksets, of the defect.