SHINOLA DETROIT Manual page 4

SINGLE TIME MODELS
SETTING THE TIME
1 Pull out the crown to position II.
(The watch stops.)
Turn the crown until you reach the
2
correct time.
3 Push the crown back to position I.
SINGLE TIME WITH DATE MODELS
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back into position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown until the correct date appears.
Push the crown back to position I.
3
4 If setting the date between 9:30 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.
1
I II
2
3
1
I II III
3
1
I II
2
3
6
CHRONOGRAPH MODEL 5020.B
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the four chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero .)
SETTING THE TIME
2
1 Pull out the crown to position III.
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back to position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I.
4 If setting the date between 9:30 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the following day.
Center stop-second
Minute hand
I
Hour hand
Minute counter
Hour counter
Second hand
Big date
7
A
I
B
1
I II III
2
3
1
II
2
3