SHINOLA DETROIT Manual page 14

GMT MODEL 515.24H
If your 24-hour watch features a date indicator, the date window might be in a different position
from the one depicted in this manual.
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back into position I.
SETTING THE 24-HOUR INDICATOR
Pull out the crown to position II.
1
(The watch continues to run.)
2 Turn the crown counterclockwise
until you reach the correct time.
3 Push the crown back to position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown clockwise until the
correct date appears.
3 Push the crown back to position I.
4 If performing a quick date setting between
10:30 p.m. and 12:00 a.m., follow steps 1
through 3, but be sure to set the date to the
following day, as there will be no change at midnight.
1
I II III
31 31
3
1
I II
31 31
31 31
3
1
I II
31 31
3
26
DAY & NIGHT (GMT) MODEL 515.24D
SETTING THE DATE
Pull out the crown to position II. (Watch still runs.)
Turn the crown clockwise until the
required date appears.
Push the crown back into position I.
NOTE: The date can also be corrected during
2
the day-changing phase between 10:30 pm and
12:00 a.m. The date of the following day has to
be set, because no automatic date change
takes place at midnight.
SETTING THE 24-HOUR DISPLAY
2
Pull out the crown to position II. (Watch still runs.)
Turn the crown counterclockwise until the
sun reaches the desired position.
Push the crown back into position I.
SETTING THE TIME
Pull out the crown to position III.
2
(The watch stops.)
Turn the crown until the current time is shown
(remember the 24-hour cycle).
Push the crown back into position I.
708
708
27