Automatic Recording - Saadat Dena User Manual

Chapter 5: Recording operation
■ Manual 3+1 Select this mode and press Lead▲ and ▼Lead keys to choose between lead groups.
Then press the Start/Stop key to start recording.
In the recording paper, the first three waveforms are the waveforms of selected lead groups and the last
one is the waveform of Rhythm lead.
■ Manual 6: Select this mode and press Lead▲ and ▼Lead keys to choose between lead groups.
Then press the Start/Stop key to start recording.

Automatic Recording

Press Mode key on the screen or the control panel to toggle between Auto 1+1, Auto 3, Auto 3+1 and
Auto 6.
Press Start/Stop key on the control panel to start recording for 3-12 seconds (Refer to chapter 2 "User
Setting Menu").
It is not possible to toggle between different leads using Lead▲ and ▼Lead keys.
There are four modes in which start by specific leads :
Auto 1+1, starts by lead I
Auto 3 and Auto 3+1, start by leads I, II, III
Auto 6, start by leads I, II, III, aVF, aVR, aVL
■ Auto 1+1: Select this mode and press the Start/Stop key to start recording.
In the recording paper the first waveform indicates the waveform of selected lead and the second one
is the waveform of Rhythm lead.
■ Auto 3: Select this mode and press the Start/Stop key to start recording.
■ Auto 3+1: Select this mode and press the Start/Stop key to start recording.
In the recording paper the first three waveforms are the waveforms of selected leads and the last one is
the waveform of Rhythm lead. The recording duration will be according to the "Rec Time".
■ Auto 6: Select this mode and press the Start/Stop key to start recording.
When the system is turned off and on, data cannot be copied.
43