System Check; Cleaning - Saadat Dena User Manual

Electrocardiograph
Hide thumbs Also See for Dena:
Table of Contents

Advertisement

Chapter 8: Care and Cleaning

System Check

Before using the device,
■ Check if there is any mechanical damage in the system and accessories.
■ Check if the power cable and accessories are firmly connected.
■ Check if all the keys function correctly and are in proper condition.
If you find any damage in the electrocardiograph, stop using it on patient, and contact the biomedical
engineer of the hospital or the manufacturer After Sales Service.
The overall check of the device, including the safety check, should be performed only by qualified
personnel.
All checks which need the electrocardiograph to be opened or may affect the device safety should be
performed by After Sales Service.
Warning
If users do not follow a satisfactory maintenance schedule, the device may become invalid,
and human health may be endangered.
To ensure maximum battery life, let the electrocardiograph runs on the battery, at least once a
month, until it turns itself off and then recharge the battery.

Cleaning

Use only the substances approved by us and methods listed in this chapter to clean or disinfect your
equipment.
Manufacturer makes no claims regarding the efficacy of the listed chemicals or methods as a means for
controlling infection. For the method to control infection, consult your hospital's Infection Control
Officer or Epidemiologist. See also any local policies that apply within your hospital.
Warning
Before cleaning the electrocardiograph or the accessories, make sure that the equipment is
switched off and disconnected from the power line.
58

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dena 650

Table of Contents