Chapter 7: Data management
General
All ECG recorded data in Auto and Rhythm modes will be automatically stored in the internal
memory of the device for future reference. For this purpose, the Save option in User settings menu
should be ON.
Up to 100 records can be stored in the internal memory. When the memory is full the new data will
overwrite the oldest data.
Transferring the saved data is possible through the Export menu using a flash memory.
Archive Menu
Select Archive from the Main Menu to access the below menu.
Enable Save in the User Setting menu to save signals recorded in Auto and Rhythm modes. You can
see the saved signals in Archive Menu. If you disable the Save, no signal will be saved and displayed
in this menu.
Each record in the Archive Menu contains the following information:
_
Assigned code by the system
_
Patient Name (if any)
_
Patient ID (if any)
_
Date and time of recording
Recording mode: "R" indicates Rhythm mode and "P" indicates Periodic mode. "PR" indicates both
_
Rhythm and Periodic modes.
The last record is always displayed at the top of the list.
Press
or
Swipe up and down to access the previous and next pages.
Figure 7-1 Archive menu
to move to the previous or next record
52