Dyson DC15 Service Manual page 9

General notes
Before attempting any repairs it is vital to ensure that the product is
totally isolated from the mains supply and that accidental
reconnection cannot occur.
Where this symbol is shown ensure ESD protection is used.
All screws used in DC15 are Torx T15, unless otherwise stated.
Assembly guide
The fitting notes contained within this service manual are separated into the following assembly
sections:
Wand handle and
Stabiliser and
Removing the cleanerhead and yoke assembly
1
Undo the two screws to the side of the yoke.
Issued 05/05
hose
Valve
axlestand
Duct
Cyclone and bin
Ball and motor
bucket
Cleanerhead and
yoke
2
Slide the yoke cover away from the side of
the yoke to expose the connections.
service manual
6