Dyson DC15 Service Manual page 28

service manual
103
Lower the channel on the motor mount
onto the detail inside the front of the motor
bucket base. Lower the rear of the motor
bucket seal into the channel in the rear of the
motor bucket base.
104
Fit the motor bucket seal around the
edges of the motor bucket base.
105
Tuck both wires behind the 'smiley' face
on the fancase seal.
25
106
Slide the small bearing onto the motor bucket
axle. Lower both parts into the front of the motor
bucket base.
107
Fit the motor bucket top onto the base.
Ensure the seal covers all edges of both parts.
Refit the five screws.
108
Slide the large bearing (teeth first) onto the
rear of the motor bucket.
Issued 05/05