Dyson DC15 Service Manual page 44

service manual
192
Peel the duct valve seal off the side of the
duct.
193
Release both catches on the front of the
lower cable winder. Slide the lower cable
winder off the rear of the duct.
194
Twist the cyclone release catch out of the
duct. Remove the cyclone release catch spring.
41
Hose/u-bend and wand assemblies
195
Press both hose release catches and slide
the wand handle assembly out of the hose/u-
bend assembly.
196
Push the wand catch backwards until it
releases from the wand handle assembly.
To refit, push both locators on the catch into the
retainers on the wand handle assembly.
197
Peel the u-bend seal off the end of the
u-bend.
When refitting the u-bend seal, ensure it locates
over the rib highlighted.
Issued 05/05