Dyson DC15 Service Manual page 17

42
Lower the glamour cover into the brush
housing.
43
Slide the soleplate wheels onto the axles.
Fit both parts into the brush housing.
44
Clip the rear edge of the soleplate into the
brush housing and then lower the soleplate onto
the brush housing. Refit the five Pozi screws
ensuring that the short screw locates in the
centre.
Issued 05/05
service manual
45
Refit the brushbar motor bottom mount
into the brush housing.
46
Refit the brushbar motor end mount onto
the end of the brushbar motor assembly.
47
Lower the brushbar motor assembly into
the brush housing.
14