Dyson DC15 Service Manual page 39

164
Disconnect the neutral wire from the internal
cable.
165
Release the powercord protector from the
front of the duct.
Issued 05/05
Refitting the powercord assembly
and switches
166
Fit the powercord assembly into the duct
ensuring that the end of the outer insulation
extends past the screw boss. Slide the
protector into the side of the duct.
167
Fit the ON/OFF switch into the duct.
Re-attach the live wire to the switch.
168
Re-attach the live (brown) wire from the
internal cable to the ON/OFF switch. Fit the
brushbar switch into the duct. Attach the live
(brown) linked wire to the brushbar switch.
service manual
36