Dyson DC15 Service Manual page 11

Removing and dismantling the yoke assembly
9
Release the yoke loom from the back of the
yoke assembly.
10
Prise the large and small gimble clips out of
either side of the cleanerhead top hinge using a
thin flat bladed screwdriver.
11
Remove both gimble clips from either side
of the cleanerhead top hinge.
Issued 05/05
service manual
12
Remove the yoke assembly from the rear
of the cleanerhead top hinge.
13
Prise the rear of the hose guard out of the
yoke using a thin flat bladed screwdriver.
14
Push the end of the gimble lock arm
assembly out of the same side of the yoke.
8