Dyson DC15 Service Manual page 15

32
Lift the front edge of the soleplate off the
brush housing. Then unclip from the rear.
33
Lift the four soleplate wheels and axles out
of the underside of the brush housing. Slide the
wheels off the axles.
34
Lift the glamour cover out of the rear of
the brush housing.
Issued 05/05
35
Slide out the brushbar motor front mount
from the front of the brush housing.
36
Release both bumper catches from the
front of the brush housing using a Torx
screwdriver.
37
Firmly push the bumper and bumper
rubber off the front of the brush housing.
service manual
12