Dyson DC15 Service Manual page 13

20
Undo the screw in the underside of the brush
housing.
21
Undo the four black screws in the top of the
brushbar motor cover.
22
Remove the brushbar motor cover assembly
off the top of the brush housing.
Issued 05/05
service manual
23
Lift out the two brushbar motor top mounts
from inside the brushbar motor cover assembly.
24
Remove the cleanerhead spring from the
top of the brush housing.
25
Carefully unclip the yoke loom wires from
the end of the brushbar motor assembly.
10