Dyson DC15 Service Manual page 24

service manual
82
Undo the three screws in the side of the
duct cover noting that the top screw is shorter
than the other two.
83
Pull the duct cover and seal off the side of
the duct.
84
Disconnect the live and neutral wires
between the vac motor loom and the internal
cable. Carefully snip the cable ties that hold
the looms together.
21
85
Undo the two screws in the side of the duct.
86
Force the valve assembly over to one side.
Release the motor bucket axle from the hole in
the valve assembly. Firmly release the motor
bucket from the side of the duct.
Issued 05/05