Override Button; Choke Lever - Can-Am DS250 Operator's Manual

NOTE: The engine will not turn if the
engine stop switch is turned to OFF
position.

Override Button

This button is used to override the re-
verse speed limiter system while pow-
er backing up. Press and hold the
override button then depress throttle
lever gradually.
WARNING
Never activate the override but-
ton if throttle lever is already de-
pressed as loss of control may
result, causing severe personal in-
jury or death.
vmo2006-014-055_b
TYPICAL
1. Override button

Choke Lever

This device features a variable lever to
ease engine cold start.
Position OFF is for normal use with a
warm engine.
______________________
68
CHOKE LEVER IN THE OFF POSITION
The full choke position is used for low-
er engine temperature.
CHOKE LEVER IN THE FULL CHOKE
POSITION
The other positions between OFF and
FULL position, will be use depending
on the engine temperature.