Can-Am DS250 Operator's Manual page 98

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
PART/TASK
STEERING
Handlebar fasteners
Throttle/housing/cable
condition (2)
Choke
(2)
Steering system
(column, bearing, etc.)
Tie rod ends
Wheel nuts/studs (2)
Tires pressure and wear
Front wheels alignment
Ball joints
SUSPENSION
Swing arm (2)
Shock absorbers (2)
A-arms
BRAKE
Brake fluid
(2)
Parking brake cable adjustment
Brake pads
(6)
Brake system (discs, hoses, etc.)
______________________
96
PERIODIC MAINTENANCE CHART
(2) I
I,
A
I
I
(4)
I
I
(2)
I
I
(6) A A
(6)
INITIAL INSPECTION 10 H OR 30 DAYS OR 200 KM (125 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
200 H OR 2 YEARS OR 4000 km (2485 mi)
I Dealer
I,
A, Customer
L
I,
Customer
A
I Dealer
I Dealer
I Customer
EVERY RIDE Customer
I Dealer
I Dealer
I Customer
I Customer
I Customer
R
I Customer
(6)
Customer
I
Customer
(4)
I Customer
TO BE PERFORMED BY
LEGEND
(2) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
(2) Pre-ride inspection item.
(2) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
(6) Brake fluid replacement or
any brake system repairs must
be performed by an authorized
Can-Am dealer.