Direction Indicator Switch; Horn Button; Hazard Warning Button; Winch Remote Control - Can-Am outlander 400 series Operator's Manual

31) Direction Indicator
Switch
This switch is located on the left side
of handlebar.
vmo2006-006-003_a
TYPICAL

1. Horn button

2. Direction indicator switch

To activate the direction indicator
lamps, push the switch button on the
right or the left side, depending which
direction you picked. Reposition the
switch in the middle when the ma-
neuver is completed.
32) Horn Button
The horn button is located on the left
side of handlebar.
vmo2006-006-003_a
TYPICAL
1. Horn button
2. Direction indicator switch

33) Hazard Warning Button

This button is located on the left side
of console.
TYPICAL
1. Hazard warning button
Device fitted to the vehicle that oper-
ates a simultaneous flashing of all the
direction indicator lamps, used when
the vehicle is stationary to indicate that
the vehicle is temporarily obstructing
traffic.
Press the hazard warning button once
to activate the device. Press once
again to deactivate.
The hazard warning button blinks also
when the hazard warning lights blink.

34) Winch Remote Control

XT Models
A winch remote control is provided
with the vehicle to ease winch oper-
ation if necessary.
The winch remote control is located in
the access panel of the front service
compartment.
_____________________
93