Can-Am DS250 Operator's Manual page 97

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
PART/TASK
FUEL SYSTEM
Air filter/air injection valve filter
Fuel filter
Fuel lines, connections and fuel tank
pressure test
Carburetor (1)
ELECTRICAL SYSTEM
Spark plug (5)
Ignition timing
Battery connections
Wiring harnesses, cables and lines
Condition of ignition switch, engine
start button and engine stop switch
Condition of lighting system
(HI/LO intensity, brake lamp, headlamp
aiming, etc.)
(2)
DRIVE TRAIN
Drive chain lubrication
Drive chain slider condition
Drive chain adjustment
Drive chain sprockets
Wheel bearings
PERIODIC MAINTENANCE CHART
INITIAL INSPECTION 10 H OR 30 DAYS OR 200 KM (125 mi)
(To be performed by an authorized Can-Am dealer. The initial
maintenance is very important and must not be neglected.)
25 H OR 500 km (310 mi)
50 H OR 1000 km (620 mi)
100 H OR 1 YEAR OR 2000 km (1250 mi)
I,
R
C
(4)
(4)
I I
I I
A A
I R
I I
I I
I I
I I
(2)
I I
EVERY RIDE
EVERY RIDE
EVERY RIDE
I I
I
_____________________
200 H OR 2 YEARS OR 4000 km (2485 mi)
TO BE PERFORMED BY
Customer
(1) Emission-related component.
(4) More often under severe use
R Dealer
such dusty area, sand, snow,
wet or muddy conditions.
Dealer
Dealer
Customer
Dealer
Customer
(2) Pre-ride inspection item.
Dealer
(5) Make sure the spark plug is
correctly gapped.
Customer
Customer
Customer
Customer
Customer
Customer
Customer
LEGEND
—
95