Securam ProLogic L22 Operating Instructions Manual page 14

ProLogic L22
5.0 System Info - System Identification
This menu feature would be used to determine the type of safe lock system being used. Many of the
SECURAM ProLogic EntryPads look the same, but the features sets and capabilities vary greatly
depending upon the software being utilized. To determine the type of ProLogic Safe Lock system, follow
this process:
5.1 System Info:
Step1: Press the Menu/OK button.
Step 2: Using the  and  scroll to the "System Info" and Press OK.
The screen will display Information about the system, including the model number of the
ProLogic EntryPad.
This menu selection can be accessed within the root menu, as well as within the Administrative menu.
6.0 Time Delay
Time Delay is a feature used to deter burglary. Provided a prospective burglar has knowledge that a
Time Delay safe is in use, the likelihood of burglary is greatly reduced.
Time Delay is a feature that requires the User to enter his/her code, wait a prescribed period of time,
and then re-enter a valid code to unlock the safe lock.
6.1 Set/ Cancel Time Delay
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press Menu/OK
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll UP to the menu selection "Set/Cancel Time Delay" and Press OK.
Step 5: Press the  and  to adjust the Time Delay value (0-99 minutes). Press OK.
Operation Instructions
14