Securam ProLogic L02-C Operation Instructions Manual

ProLogic L02-C
ProLogic L02-C Operation Instructions
Document No: EC-0601A-L02-C-160617
Version No: V1.01
1.0 System Installation
1.1 System Components
1.2 Pairing the EntryPad with the Lock(s)
1.3 Lock and EntryPad Installation
1.4 Installing Battery
1.5 Test Lock Operation
2.0 Lock Operation
2.1 Opening the Lock
2.2 Opening the Lock in Time Delay
2.3 Opening the Lock in Dual Control
2.4 Opening the Lock with a Multi-Lock System
3.0 Code Management
3.1 Code Length Options
3.1.1 PW L – 6 / Users 10
3.1.2 PW L – 8 / Users 30
3.1.3 PW L – 6 / Users 30
3.2 Enrolling New users
3.3 Change Code
3.4 Delete One User
3.5 Delete All Users
3.6 Disable/Enable User
IMPORTANT: It is imperative that all programming be completed with the safe
door in its open position, such that the programmer can gain access to the lock
body in the event of an incorrect programming.
Operation Instructions
3.7 Obfuscate Code Entry
4.0 System Identification
4.1 System Info
5.0 Time Delay
5.1 Set/Cancel Time Delay
5.2 Setting Time Delay Override Users
6.0 Single or Dual Control
6.1 Enable Dual Mode
6.2 Dual Mode Group ID
7.0 Manager Mode
7.1 Enable Manager Mode
7.2 Disable Manager Mode
8.0 Door Management
8.1 Configuring a Multi-lock system
8.2 Set Number of Locks
8.3 Authorize Locks
8.4 Enable Sequence
9.0 Data Management
9.1 Encryption Key Set
10.0 Recovering the System – Reset to Default
10.1 Recovery Code Set
10.2 Recover System
10.4 Mechanical Reset
11.0 System Testing
11.1 Cycle Testing
12.0 Menus
12.1 The ProLogic L02-C Menus
1