Securam ProLogic L22 Operating Instructions Manual page 15

ProLogic L22
Step 6: The system will now display the Time Window. This is the preset length of time allowed
to enter a valid code after Time Delay has expired. Press the  and  to select the Time
Window value desired.
Step 7: Press OK.
6.2 Set Duress Time Delay
The Duress Time Delay function allows you to set a different Time Delay value when a Duress code is
entered.
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01).
The "Select Menu" message will be displayed as follows:
Step 4: Scroll  to the menu selection "Set Duress Time Delay" and Press OK.
Step 5: Press the  and  to adjust the Time Delay value (0-99 minutes). Press OK.
Step 6: The system will now display the Time Window. This is the preset length of time allowed
to enter a valid code after Time Delay has expired.
Operation Instructions
15