Securam ProLogic L22 Operating Instructions Manual page 7

ProLogic L22
2.5 Opening the Lock with a Multi-Lock System
The ProLogic L22 can operate up to 4 locks.
To Open a Lock with a Multi-Lock System:
Step 1: Enter a valid code
The display will read "IDXX Verified".
Step 2: The system will now prompt you to enter the number of the Lock to open
3.0 Set Date and Time
The ProLogic L22 is an audit lock and it tracks events based on user, activity, date, and time. In order to
set the system date and time complete the following process.
3.1 Set Clock Time
Step1: Press the Menu/OK button
Step 2: Using the  and, scroll to the System Menu and press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll  to the menu selection "Set Clock Time" and Press OK
Step 5: Press OK
Step 6: Each of the elements of the date and time will flash when it is available to be set. Use the
 and  to scroll to the correct value and Press OK to move to the next element.
3.2 Show Clock Time
Step1: Press the Menu/OK button
Step 2: Using the  and, scroll to the System Menu and press OK.
Operation Instructions
7