• Easily Programmed Six-Digit User Code
• Simple 9-Volt Battery Replacement
• 10,000+ Openings on a 9-Volt Battery
• Unique No-Twist Cable Design
• Enable and Disable User Codes
• User Code Stored in Memory Within Safe Door Shielded, Along with Internal Lock,
From Drill Attacks by Ball Bearing or Hardened Steel Protection Plate
• User Code Remains in Memory for Years Even if Battery or Keypad Destroyed or
Removed
• Lock's Memory Protected Inside the Safe and Cannot be Hotwired
• After Three Incorrect User Code Attempts Lock Begins Lockout Delay Period Disabling All
Inputs to Keypad Delaying Further Tampering
OPERATING INSTRUCTIONS
Opening Safe for the First Time
SecuRam® SafeLogic Direct Drive Electronic Lock is shipped unlocked. Open the door by
rotating the hub on the front of the safe clockwise and pulling the safe door open. If the
hub seems stiff, insert a solid round wooden stick into one of the handle holes and turn
the hub clockwise to open. Then install the handles, if applicable.
Installing the Battery
Rhino Metals highly recommend using a 9-volt Duracell
with a "Use Date" of at least four years in the future.
1.
Unlock and pull the safe door open.
2.
To remove the keypad, carefully pull away from the
entrypad base. Battery cavity is located on back of keypad.
3.
With the battery cavity accessible, install a new 9-volt
battery into the terminals on the back of the keypad and
tuck the battery back into the battery cavity.
4.
Place keypad back on entrypad base located on front of
safe attaching automatically once close enough to
entrypad base.
5.
With the door open, test the operation of the lock several
times before closing and locking the safe.
SECURAM® SAFELOGIC
DIRECT DRIVE ELECTRONIC LOCK
Model EM-1701A-R
or Energizer
alkaline battery
®
®
Need help?
Do you have a question about the EM-1701A-R and is the answer not in the manual?
Questions and answers