Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
State After G3
Configure the power state when power is re-applied after a power failure
(G3 state).
Wake on LAN Enable
Enable or disable the integrated LAN to wake the system.
USB Power State in S5
Configure the USB power state in S5.
34
NDiS B338-LITE User Manual