Advanced - Nexcom EBC 358 User Manual

Chapter 3: BIOS Setup
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Aptio Setup - AMI

Advanced

TPM20 Device Found
Firmware Version: 7.62
Vendor: IFX
Security Device Support [Enable]
Active PCR banks SHA256
Available PCR banks SHA256
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
TPM 20 InterfaceType [TIS]
Device Select [Auto]
Version 2.22.1282 Copyright (C) 2021 AMI
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.
SHA256 PCR Bank
Enables or disables SHA256 PCR Bank.Pending operation
Schedules an operation for the security device.
Platform Hierarchy
Enables or disables Platform Hierarchy.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Storage Hierarchy
Enables or disables Storage Hierarchy.
Endorsement Hierarchy
Enables or disables Endorsement Hierarchy.
Enables or Disables BIOS
Physical Presence Spec Version
support for security device.
O.S. will not show Security
Configures which physical presence spec version the OS will support. Please
Device. TCG EFI protocol and
INT1A interface will not be
available. note that some HCK tests might not support 1.3.
Device Select
TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support
to TPM 2.0 devices. Auto will support both TPM 1.2 and 2.0 devices with
the default set to TPM 2.0 devices if not found, and TPM 1.2 devices will be
→←: Select Screen
↑↓: Select Item enumerated.
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
36
EBC 358 User Manual