Advanced - Nexcom NIFE 300 Series User Manual

Chapter 4: BIOS Setup

Advanced

The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Chipset Security
► IT8786 Super IO Configuration
► Hardware Monitor
CPU Configuration
►
► SATA Configuration
► CSM Configuration
► USB Configuration
Version 2.17.1254. Copyright (C) 2015 American Megatrends, Inc.
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
System Super IO Chip
Parameters.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IT8786 Super IO Configuration
This section is used to configure the serial ports.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced
IT8786 Super IO Configuration
Super IO Chip
Serial Port 1 Configuration

Serial Port 2 Configuration

Serial Port 3 Configuration

Serial Port 4 Configuration

Version 2.17.1254. Copyright (C) 2015 American Megatrends, Inc.
Super IO Chip
Displays the Super I/O chip used on the board.
67
Set Parameters of Serial Port
1 (COMA)
IT8786
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NIFE 300 Series User Manual