Install The Pa-7050 Firewall In The Front-Mount PosiOn - PaloAlto Networks PA-7000 Series Hardware Reference Manual

PA-7000 Series Firewall Installaon
STEP 5 | Aach the rack-mount brackets to the rack using rack-mount screws (not provided) and
ghten with a screwdriver. Install four screws on each side of the chassis.
Install the PA-7050 Firewall in the Front-Mount Posion
The following procedures describe how to install the PA-7050 firewall in a front-mount posion.
The chassis ships with the rack-mount brackets in the mid-mount posion, so you will need to
move the brackets to the front-mount posion as described.
The PA-7050 chassis and the front slot cards (SMC, LPC or LFC, NPC) ship in separate
boxes and it is recommended that you install the cards aer you rack-mount the chassis.
This will prevent any damage to the cards that could occur during rack mounng and will
reduce the chassis weight. To further reduce the chassis weight, remove the fan trays and
front power supplies.
STEP 1 | Read PA-7000 Series Firewall Rack Install Safety
PA-7000 Series Firewall Hardware Reference
Informaon.
72
2021 Palo Alto Networks, Inc.
©