PA-7000 Series Firewall Module and Interface Card Informaon
LED
STS (STATUS)
ALM
(Alarm)
TMP
(Temperature)
SVC (Service)
PA-7000 Series Firewall Hardware Reference
State
Descripon
Green
The LFC is operang normally.
Yellow
The LFC is boong up.
Red
There is a hardware failure, which may include the
following:
• Voltage issue.
• Power supply detected but not operaonal.
• Fan failure.
• Hard drive failure.
• Temperature above high temperature threshold.
You may also see varying behavior for the ALM LED in an
HA configuraon as follows:
• If HA transions into tentave or a non-funconal state,
the ALM LED turns red.
• When the state returns to a funconal state (any acve
or passive state) the LED turns off.
• If you intenonally suspend HA, the LED will not turn
red.
• If the firewall is suspended due to a failure loop, the
firewall will go into a suspended state to end the loop.
In this case, the LED turns red.
Green
The chassis temperature is normal.
Yellow
The LFC temperature is outside the temperature tolerance.
Off
The LFC is operang normally.
Allows a remote administrator to illuminate the SVC LED on a specific front-
slot card so an on-site technician can locate the card.
Enter the following command to view the status of the SVC LED on all cards
that have this LED:
admin@PA-7080> show system service-led status
Service LED
Slot Description
s1 empty Off
s2 empty Off
s3 PA-7000-100G-NPC Off
s4 empty Off
s5 empty Off
Status
51
2021 Palo Alto Networks, Inc.
©