PaloAlto Networks PA-7000 Series Hardware Reference Manual page 187

Service the PA-7000 Series Firewall Hardware
system raid slot s7 remove A1
This procedure is based on a PA-7080 firewall where the LPC is installed in slot
s7. If you are working on a PA-7050 firewall, the LPC is installed in slot s8. For
a PA-7050 firewall, replace slot s7 with slot s8 in those commands that
specify the LPC slot number.
2. Gently pull the AMC release handle on drive A1 toward you unl it stops to unlock the
AMC from the chassis and then completely remove the AMC.
PA-7000 Series Firewall Hardware Reference
187
2021 Palo Alto Networks, Inc.
©