Procedure
1. Interchange the servers from the System Management Interface (SMI) by one of
2. Busy out the Off Line (standby) server by performing one of the following methods:
Tasks to replace an Avaya S8800 Server
#
1
Shut down the server. If you can shut down
2
Disconnect all power
cords and external
cables.
Maintaining the Avaya S8800 Server for Avaya Aura
the following methods:
• If the Standby Refreshed? value is yes (for update/upgrade):
i. Select Server > Interchange Servers.
ii. Click Interchange.
• If the Standby Refreshed? value is no:
i. Select Server > Interchange Servers.
ii. Select the Force interchange regardless of server status check
box.
Important:
Selecting Force interchange regardless of server status
results in a cold interchange and connections are not
preserved.
iii. Click Interchange.
• On the System Management Interface, click Busy-out Server.
• At the command line interface type server -b and press Enter.
Task
the server from the
software, do so.
Otherwise, press the
power button for
several seconds to
shut down the server.
Description
Important:
Be sure to label the
cables for easy
reconnecting.
®
Communication Manager
Replace the Avaya S8800 Server
Notes
July 2012
13