Ont Installation; Shipping Contents - ADTRAN Total Access 374 Installation And Maintenance Manual

Total Access 374 4-POTS, 4-GigE MDU ONT Installation and Maintenance Guide

ONT Installation

!
CAUTION
Electrostatic Discharge (ESD) can damage electronic components. When
handling modules, wear an antistatic discharge wrist strap to prevent
damage to electronic components. Place modules in antistatic packing
material when transporting or storing. When working on modules, always
place them on an approved antistatic mat that is electrically grounded.
After unpacking the ONT, inspect it for damage. Before beginning the installation of the ONT,
the technician should accomplish the following to verify component integrity.
1. Unpack both the ONT and power supply (packed separately) to ensure the units are vis-
2. Examine the ONT enclosure, fiber management guide, associated terminals, weather
3. Examine the power supply to ensure that the UPS, battery and power cord are present
If damage has occurred, file a claim with the carrier then contact ADTRAN Customer Service.
Refer to
keep the original shipping container for returning the ONT for repair or for verification of
shipping damage.

Shipping Contents

The contents include the following items:
■ Total Access 374 4-POTS, 4-GigE MDU ONT Job Aid (P/N 61287703G1-22)
■ Total Access 374 4-POTS, 4-GigE MDU ONT Safety and Compliance Notice
2-2
C A U T I O N ! C A U T I O N
SUBJECT TO ELECTROSTATIC DAMAGE
HANDLING PRECAUTIONS REQUIRED.
ibly intact and are not missing any components.
resistant grommets, fiber connector, telephone, and Ethernet ports for usability.
and sound.
Appendix A, "Warranty and Customer Support"
(P/N 1287703G-17)
OR DECREASE IN RELIABILITY.
for further information. If possible,

61287703G1-5B