Required Tools; Necessary Supplies - ADTRAN Total Access 374 Installation And Maintenance Manual

Required Tools

Standard technician tools are used for an ONT installation (for example, drill, drill bits, side
cutters, screwdrivers, nut drivers, hex wrenches, wire strippers, etc.).
Specifically, the following tools are required for the installation of the ONT:
■ Carpenter's level
■ 3/32 inch screw driver
■ 5/32 inch hex tamper-proof bit
■ 216-Type can wrench
■ Four RJ-11 connectors for POTS connections
■ Four RJ-45 connectors for Ethernet connections
■ A telephony/data communication test set
■ Power meter preferably with wave length filtering
■ Fiberscope or videoscope
■ Optical Time Domain Reflector meter calibrated for 1310 and 1490 nm output
■ Composite fiber cable for non-connectorized installation
■ ONT mounting hardware
■ Silicone sealant (and application material, i.e., cotton swabs)
■ Bonding clamp for grounding and securing the composite cable on non-connectorized
■ One (1) each, 60 inch Hi-cap riser pipe (for composite cable installation)
■ Tie wraps
For fiber optic connections, the following are required:
■ Fiber Optical Fusion Splice Tools
■ TexWipe
■ TexWipe
Included with the ONT packaging are fiber cable management, strain relief and fiber
connectors.

Necessary Supplies

Make sure the following supplies are available:
■ Appropriate surface anchors for mounting the ONT, each anchor rated to 15 pounds (6.8
■ Assorted tie wraps for securing cabling and wiring
■ ODC Fiber Cleaning Tool
61287703G1-5B
installations
TM
Alco pad for fiber cleaning
TM
cloth for fiber cleaning
kilogram) minimum
Section 2, Installation and Testing - ONT Installation
2-3