Color Mode - ETC fos/4 Series User Manual

Color Mode

1. Press the Function button (
DMX
H: 29
P1
Turn the green or blue encoder to
modify the value in the matching field.
2. Turn the encoders to change the corresponding values. For example, turn the Intensity
encoder to change the intensity value, or turn the green encoder to change the hue value.
The crosshairs on the display indicate the approximate color.
You can use a preset as a starting point for a color by pressing the color encoder that
matches the preset. Turn the red encoder to move to another page of presets.
Number
1
2
3
4
5
6
More Options
Turn off the color: Press the Intensity encoder to toggle the intensity value from the
•
current value to 0. Press the Intensity encoder again to toggle back to the previous
intensity value.
Revert to the original color of a preset: Press the encoder that corresponds to the preset
•
again to restore the original values.
Save the color to a preset: Press and hold the encoder that corresponds to the preset that
•
you want to re-record. The display shows a three-second countdown before re-recording
the preset. Changes that you make to presets in the Color screen also affect presets in the
Effects screen and the Preset screen.
Use Fixture in Stand-alone Mode
) until the display shows the Color screen.
Turn to adjust intensity, or press to
toggle between current intensity and 0.
Color
S: 20 I: 97%
P2 Page 1
Preset
3200 K
4500 K
5600 K
Yellow
Dark Straw
Red
Color
DMX
H: S: 20
29
P3 P4
Press and hold an encoder to
record the color to that preset.
Number Preset
7 Medium Pink
8 Magenta
9 Medium Blue
10 Primary Blue
11 Blue Green
12 Green
I: 97%
Page 2
Turn the red encoder to move
to another page of presets.
15