Replace Color Media
CAUTION:
ATTENTION :
l'entretien.
Note:
the media from dirt and fingerprints.
Remove the Color Module
Tip:
If you position the fixture on its side when removing the color module, ETC
recommends that you tilt the yoke toward the head of the fixture to increase the
stability of the fixture.
Tool required:
#2 Philips screwdriver
•
1. Disconnect power to the fixture and allow it to cool completely before continuing.
2. Remove the fixture cover from the front of the fixture.
a. Using a #2 Philips screwdriver, loosen the four captured Phillips screws that secure the
cover to the fixture.
b. Lift the cover away from the fixture, and detach the safety tether from the fixture
enclosure to completely remove the cover.
Replace Color Media
RISK OF ELECTRIC SHOCK! Disconnect power before servicing.
RISQUE DE CHOC ÉLECTRIQUE! Couper l'alimentation avant
ETC recommends that you wear gloves when changing color media to protect
34