Control Elements; Switching On The Machine; Switching On - Optimum OPTI turn TU 3008G Operating Manual

4.2.3 Control elements

Turning direction
Longitudinal feed / cross feed
Metric thread [ mm / spindle revolution ]
Feed direction
Position clamp bolt on the lathe spindle holding fixture
4.3

Switching on the machine

4.3.1

Switching on


Check that the emergency-stop button is not pressed or is unlocked. Turn the emergency-
stop button to the right in order to unlock it.

Close the lathe chuck protection.

Select turning direction.

Switch on spindle rotation.

Malfunctions on page 104
GB TU3008G
28
V

Emergency-stop switch on page 12
Translation of original instruction
Spindle rotation On / Off
Inch thread [ threads / inch ]
mm per spindle revolution
Oil fill, oiling
Version 1.1.6 - 2021-9-17
Operation